Audio Tech 462Z Betriebsanleitung PDF herunterladen (Seite 7)

-------------------------- 6 --------------------------

MEMORY and TIME SETTINGS (MEM/TIME SET)

To store a radio station (AM or FM) in memory buttons 1-6 you first select the

desired AM or FM Station, and the frequency will show on the display. A good

technique is to enter your favorite AM or FM station on button one, your next

favorite station on button number two, etc. Stations in memory can be alter-

nated or mixed in any AM or FM sequence.

After you select your favorite AM or FM station press button number one, and

you have stored that station. Select another AM or FM Station and press button

number two and you have stored another station, etc. The Mem/Time Set but-

ton is also used to set the clock.

SETTING THE CLOCK (HRS ADV) and (MIN ADV)

To set the clock the display must show the time. Press the Mem/Time Set but-

ton and hold it in. While holding, each time you press the Hrs Adv button you

advance the hour setting of the clock by one hour. If you hold the Hrs Adv

button in, the hour setting will rapidly advance through the 24 hour settings. Be

sure to observe the PM indicator when setting the correct hourly time.

When time is displayed and the Mem/Time Set button is pressed and held, each

press of the Min Adv button will advance the minute setting of the clock by one

minute. If you hold the Min Adv button in, the minute setting will rapidly advance

through the 60 minute settings.

RADIO AUTOMATICALLY TURNS ON (ON TIME)

When the On Time button is pressed and immediately released, the display will

switch to the Auto On Time and the red LED indicator above the button will light.

The On Time can now be set using the Hrs Adv and Min Adv buttons. The

display will return to the normal time, and the red LED above the button will go

out after ten seconds of no activity. The “On” Time is used with advance through

the 60 minute settings.

RADIO AUTOMATICALLY TURNS OFF (OFF TIME)

When the Off Time button is pressed and immediately released, the display will

switch to the Auto Off Time and the red LED indicator above the button will light.

The Off Time can now be set using the Hrs Adv and Min Adv buttons. The

display will return to normal time, and the red LED above the Button will go out

after ten seconds of no activity. The “Off” Time is used with the auto function.

See next page.

1 2 3 4 5 6 7 8 9 10

Keine Kommentare

Audio Tech 462Z Betriebsanleitung Seite 7